Windshield trim studs info
 

I did some metal reapir in the area around my windshield and back glass and ending up removing/grinding etc. those studs that hold the clips for the trim around these window glass.
I bought new clips and the studs that have been threaded. I just need to drill small pilot holes and screw them in.
My problem/question is how far apart do they need to be? What about how far up the edge they need to be to hold the trim flush.
Any help in trying to figure out how to locate these would be a great help. The guy helping me is a painter and young. So he hasent really worked on any vehicles with this type trim before.

I can measure mine for you if you don't get what you need.

Ray

If its not much trouble that would be great

Anybody have there trim off? I think I got a proper plan. But still would like some comparison numbers.
I can get the proper height by measuring the ones that are still good.
How many and how far apart they are is what I would need to know at this point.

Finally got the car uncovered today. Here you go, sorry it took so long.

Thanks for that info.

HEy I came back to refferance this info and the info seems to be gone??? If I remeber you had photos with the measurement between the studs. Is it possible to retreave them?

Let see if I can find them

Ray

Any luck Ray???? I hate I miss placed it.

No, but I will remeasure for you tonight. Here you go. Should be able to copy them and enlarge them.

Ray