Do you have 2 sets, hopefully one set taller than the other? If so I would place one set at the cowl and another near the front bumper. Lift from the cross member then lower the front to the stands near the cowl, adjust the other set up so they're close to the frame and continue to lower. The front will sag and hit the second set. Without the second set it will sag a lot because of the engine weight. I wouldn't want to leave it that way a long time. If you just put them out front it will still sag behind them.
If only one set then as close to the lower control arm as possible or support the cross member.
__________________
Hank
70 Chevelle SS396(454), M20, 3.73
My Chevelle
|