|
|
|
#1
01-26-2011, 07:02 PM
|
|||
|
|||
Torque
Hey folks! I got a 67 Chevelle 300 Sedan with a 402 BB sitting in the frame and I need to know it some one can tell me what the torque is on the Hooker Headers. They are bolting to Edelbrock Aluminum heads, the headers have 2" primary and 3 1/2" collector. I had to drop one to get to the old oil sending unit now I'm going back with it I don't remember the torque.
All help is appreciated. Thanks mikes67 Last edited by mikes67; 01-26-2011 at 07:03 PM. Reason: misspelled word 
|
|
#2
01-26-2011, 07:59 PM
|
||||
|
||||
|
I believe iron heads and manifolds are 40 ft/lbs but you have aluminum heads. I would go to the Edlebrock website and see what they say. I know they have torque settings for their aluminum intakes. I wouldn't go 40, if anything start light then snug them up a few times after a heat up cool down cycle.
|
 |
|
|
Linear Mode
