ChevelleForum.net

Go Back   Chevrolet Chevelle Forums > Chevrolet Chevelle Car Talk > Chevelle Gallery

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-16-2011, 07:42 AM
Berg's Avatar
Berg Berg is offline
Senior Member
 
Join Date: Oct 2010
Location: Eastern Long Island, NY
Posts: 214
Default

Well I got a lot of aftermarket wiring and some gauges that were added onto it over the years. It had a trunk-mounted battery and fuel line with dual Holley blue fuel pumps plumbed up with AN fittings and what looks like 7/16" aluminum fuel line going to a fuel cell in the trunk. I ended up removing all traces of the aftermarket fuel system with wiring and relays and cleaned up more loose ends under the hood. I got rid of a piece of wire strapping someone used as a coil bracket and pulled the wiring out of the holes in the firewall from the remains of an under-dash mounted MSD box. Now that I got everything not original gutted out i'll be able to figure out what is missing. So far I noticed a burnt off fusable link on the passenger side by the headlight wiring, I re-hooked up the factory positive junction block on the radiator support and I found the blue and white leads for the alternator have been cut off about 4" out of the harness wrap. The coil + wire has been cut, the ring terminal is missing off the tach wire, and I found the oil pressure wire under the booster and the coolant temp wire was tucked up into the drivers side fender. I moved the coolant recovery tank back to the stock mounting location for now until I get a new replacement. The original one was used as an isolation block for the + cable coming from the trunk to the battery. I can only imagine what would have happened if the cable terminals got hot and it melted out the stud and hit the frame or engine. Thats all for now, we had a good time playing with the 2011 Camaro this weekend to get anything else done. I'll try to have pics to follow up later on this week when I get a new camera.
__________________
1970 Chevelle SS396 project with 454/M20 ps,pdb,U14 gauges, rear defroster
84 K5 Blazer 350/SM465
75 K5 Blazer 355/SM465/8 lugs
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:58 AM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Audiokarma.org