|
|
|
#6
01-04-2010, 08:23 PM
|
||||
|
||||
You need to do what outcast did at a minimum. c-clip eliminators tend to leak.I have a steel main cap on the torque side of my spool(differential) it is from mark williams you should also have your axle tubes welded to your center and upgrade to 1/2" wheel studs with a support cover. This may seem a bit overkill but a manual trans is alot harder on the rear end.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode