72 Driver NorthCarolina UNDER CONSTRUCTION

[smokenjoep01]

Thanks Flash.
I found the tourque converter bolts on the flywheel! Got the motor and trans in last night. Tonight I have to get the headers mounted up to the motor. It looks like a challenge to get them on, but shouldnt be a problem if I pull one side motor mount bolt at a time and roll it to the side I need to gain access. One concern I have is I bought the headers used and they came off a 68-69 Camaro. I was told prior they would fit. But now I have a slight dought. Anybody know?
Carpoor, I'm not sure were your talking about. Any pictures, links, diagrams. I am thick headed and work best with pictures Thank you all for the help.

[carpoor]

My car is all back together, so I don't have any pictures. I assembled that part of the car several years ago. The best way I can explain it, if you are sitting on the pass side floor board looking towards where the glove box door would be. In that upper right hand corner of the cowl is where that piece should go. I'll see if I have an assembly manual. If anyone has one for a 68'-72' car, it should be similar enough for you to see an exploded view of said part/area.

[smokenjoep01]

Originally Posted by carpoor

My car is all back together, so I don't have any pictures. I assembled that part of the car several years ago. The best way I can explain it, if you are sitting on the pass side floor board looking towards where the glove box door would be. In that upper right hand corner of the cowl is where that piece should go. I'll see if I have an assembly manual. If anyone has one for a 68'-72' car, it should be similar enough for you to see an exploded view of said part/area.

I got it figured out. It mounts in the area you spoke of just on the outside of the winshield. I was thinking inside is why I couldnt figure it out. Thanks