|
|
|
#11
02-25-2012, 09:56 PM
|
||||
|
||||
Few photos of current progress.
The transmission went in yesterday and the headers & exhaust were put in place today. The Magnaflow 3" exhaust kit fit like dog do-do. The exhaust pipes are too short by about 8 inches so those will have to be modified. If things continue at this pace the front suspension will be done by mid week and this car should be ready by next weekend (or at least on the dyno for tuning by then.) Car as of first thing this morning  Doug's D316 1 7/8" Headers are TIGHT! I don't know how people fit 2" primaries on this car... Had to clearance the 200-4R to get the passenger side to fit  Driver side lower A-arm. Definitely tight!  They sit nice and level and tuck up to the floor board real well  Super short exhaust tail pipes that will need to be corrected  Motor sitting in place and getting ever so close to firing up! 
__________________
Eric 496 cu. in. "cruiser" Assembled & tuned by Mo's Speed Shop - Dallas, GA Last edited by fleming23; 02-25-2012 at 10:06 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode