New Project of mine

[Rattler]

And Hello my Darling! LOL



First thing I had to do was strip off the harness, a/c compressor and alternator.



I used a set of Dirty Dingo motor mount adapters.



And I dropped the motor into place to see what kind of issues I was going to have.



The pan was hitting the crossmember on the corners and I could not get it to sit back at the correct angle so I pulled it back out and notched my crossmember and rewelded it.



And now she sits in there beautifully with no problems.



Next I will be test fitting the T-56

To be continued. =)