|
|
|
|
|
#1
06-10-2013, 09:10 PM
|
|||
|
|||
On top of all my errand running around today with my oldest grand daughter in tow...found the time to pick up the freshly recovered front bench seat for the wagon from the upholstery shop...a task that took almost 2 months from the time the original pattern material order was placed with SMS.
Greenbrier has a completely different vinyl seat pattern than the other '70 Chevelle models. Very pleased...
__________________
2017 Camaro RS -217 cu in 365 HP w/8 speed auto 1967 Camaro SS -5.3L LS w/4L60E & 4.11 12 bolt 2019 Cadillac XT5 3.6L V6 w/310 HP & 8 speed AWD 
|
|
#2
06-13-2013, 03:06 PM
|
|||
|
|||
|
Spent all day at my folk's working on my car. It doesn't look like much, but today's progress includes: touched up some spots on the firewall from the engine install, all three ground straps installed, passenger side exhaust manifold installed, spark plugs indexed/gaped/installed on passenger side bank, passenger side valve cover gasketed & bolted down, valve cover to air cleaner gromet installed, driver's side valve cover got some love - wet sanded, filler primered, wet sanded again, and repainted. I went to install the passenger side lead pipe, and realized I didn't have any exhaust doughnuts.
 It's always something. I also removed the POA valve, and some brackets so I can clean it all up. I used liquid electrical tape to redo the wire guides on the passenger side valve cover this morning. It came out pretty good, won't win any concourse judged shows.  
__________________
1972 SS 454 Chevelle LS5/M21/12 bolt 3.73 posi 1969 Malibu COPO L72/M20/12 bolt 3.31 posi 1968 Malibu LQ9/4L80E/12 bolt 3.73 posi
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
