Frankenmuth this year?

[Hank70SS]

Originally Posted by RBeckman

It's on the frame rail were the stabilizer bar bolt (the uclamp) goes, it was stripped missing when I got the car so I put in a oversize bolt in it and it looks like shit. Not sure what to do to it, weld a plate or fill in the hole some and tap.

If you could get to the back side I would weld a plate, but you can't. Should be able to build up the hole with weld enough to tap it. Frames are thick enough that hopefully it doesn't melt back and make the hole bigger. May be able to drill the hole bigger and slide a plate or washer inside and weld it. Hard to get it in the right position but there are enough holes in the frame that we should be able to do it.

Hey, I think one of mine is stripped too. Pretty sure I got a nut up inside the frame and was able to bolt it down.