ChevelleForum.net

Go Back   Chevrolet Chevelle Forums > Chevrolet Chevelle Garage > Chevelle Wheels & Tires

Reply
 
Thread Tools Display Modes
  #1  
Old 05-15-2010, 09:35 AM
grumpy's Avatar
grumpy grumpy is offline
Administrator Bowtie Member
 
Join Date: Dec 2009
Location: Royal Oak, Mich
Posts: 1,230
Default

I am sure I want a wider rim out back. Ideally a 27-28" tire out back would be nice. Anything smaller and I have to cut the springs to lower it more. May do that anyway. Thanks

Dave
__________________
Dave
Reply With Quote
  #2  
Old 05-15-2010, 12:54 PM
Highway Star's Avatar
Highway Star Highway Star is offline
Moderator
 
Join Date: Dec 2009
Location: Baton Rouge
Posts: 1,120
Default

This is a '71 with 17 x 9.5" (5.5" BS) and 17 x 11" (6.25" BS) Cragars.

The tires are 275/40/17 and 315/35/17, and the car is sitting on a stock suspension setup.











A 315/35/17 tire has dimensions of 12.5" x 25.7" and a 275/40/17 has dimensions of 9.5" x 25.7".

That means the fronts and rears on this car are matched for the same tire height.

These look a little short to me personally, not enough meat. If you went to a taller aspect ratio, say maybe a 315/45 out back, overall diameter would be 28.2" tire for the rear, and a 315/40 would give you a 26.9" height, and both of those will add a little meat to the sidewall.

This is a good ballpark area to start from, huh?
__________________
Jake
1972 Malibu Sport Coupe - ~9.8:1 355"
Reply With Quote
  #3  
Old 05-15-2010, 05:39 PM
Ms Grumpy's Avatar
Ms Grumpy Ms Grumpy is offline
Bowtie Member
 
Join Date: Dec 2009
Location: Just outside San Antonio, Texas
Posts: 7,403
Default

Quote:
Originally Posted by grumpy View Post
I am sure I want a wider rim out back. Ideally a 27-28" tire out back would be nice. Anything smaller and I have to cut the springs to lower it more. May do that anyway. Thanks

Dave
I like the stance of the car as it sits right now. I don't want to cut any springs at all.

Nancy
__________________
Get in, sit down, shut up, hold on...cause Ms Grumpy is driving !

For the audio geek try: www.audiokarma.org

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:47 PM.



Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Audiokarma.org