Well I finally got hold of a heat gun to try and see if there was anything I could tell with checking different spots on the engine. Every thing pretty much checks out, but the only thing that stands out is the heads temp. While the right head is at about 185 the left head is around 150, I hope this means something to someone, I hate to think that someone put the head gaskets on wrong. You would think they should be running the same temp or close to each other. Tried running it without a thermostat just to see what would happen.. did not help. Plus it still pushes water in the overflow tank way before the thermostat opens up. Driving me crazy, getting close to tear down time...
|
11-18-2013, 10:51 AM
Threaded Mode